# OpenVPN Server with UDP + TCP + Squid Proxy + ShadowSocksR **URL:** \ **Category:** Tools & Scripts\ **Tags:** tools, privacy, networking\ **Created:** [August 21, 2019, 9:58am UTC](https://onehack.st/t/openvpn-server-with-udp-tcp-squid-proxy-shadowsocksr/54377 "2019-08-21T09:58:26Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Aina](https://onehack.st/user_avatar/onehack.st/aina/32/167469_2.png) [@Aina](https://onehack.st/u/Aina)\ **Post date:** [August 21, 2019, 9:58am UTC](https://onehack.st/t/openvpn-server-with-udp-tcp-squid-proxy-shadowsocksr/54377/1 "2019-08-21T09:58:26Z")
**Configuring OpenVPN with UDP VPN + TCP VPN** **First, get the script and make it executable :** Code: ```auto curl -O https://raw.githubusercontent.com/Angristan/openvpn-install/master/openvpn-install.sh chmod +x openvpn-install.sh ``` **Then run it :** Code: ```auto ./openvpn-install.sh ``` **Configuring Steps:** **Add IPTables:** Code: ```auto iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE iptables -t nat -A POSTROUTING -s 10.9.0.0/24 -o eth0 -j MASQUERADE iptables -t nat -A POSTROUTING -s 10.10.0.0/24 -o eth0 -j MASQUERADE iptables -A INPUT -i eth0 -p udp --dport port -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport port -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport port -j ACCEPT ``` **Copy Service:** Code: ```auto cp /lib/systemd/system/openvpn\@.service /etc/systemd/system/tcpvpn\@.service cp /lib/systemd/system/openvpn\@.service /etc/systemd/system/udpvpn\@.service cp /lib/systemd/system/openvpn\@.service /etc/systemd/system/squidvpn\@.service ``` **Duplicate Files:** Code: ```auto cd /etc/openvpn/ cp server.conf udpvpn.conf cp server.conf tcpvpn.conf cp server.conf squidvpn.conf ``` **Edit Files:** nano udpvpn.conf `---> Change 10.8.0.0 to 10.9.0.0` nano tcpvpn.conf `---> Change 10.8.0.0 to 10.9.0.0` nano squidvpn.conf ` ---> Change 10.8.0.0 to 10.10.0.0` **Restart Services:** Code: ```auto service openvpn@udpvpn restart service openvpn@tcpvpn restart service openvpn@squidvpn restart ``` **Configuring Squid Proxy Server** Code: ```auto sudo apt-get update sudo apt-get install squid sudo apt-get install squid3 ``` **Change directory** Code: ```auto cd /etc/squid cd /etc/squid3 ``` **Open squid.conf** Code: ```auto nano squid.conf ``` **Search http\_port 3128** **Change the 3128 to any port eg. 5421** **Uncomment:** Code: ```auto http_access deny all ``` **Add:** Code: ```auto http_access allow all acl Safe_ports port number(replace with port number) acl SSL_ports port number(replace with port number) ``` **These are the lines you add or change:** Code: ```auto http_port 5421 http_access allow all acl Safe_ports port number(replace with port number) acl SSL_ports port number(replace with port number) ``` **Restart Squid Server:** Code: ```auto sudo service squid restart sudo service squid3 restart ``` **Configuring ShadowsocksR Super Fast Secure Proxy** Log in as the root user and run the following command: Code: ```auto wget --no-check-certificate https://raw.githubusercontent.com/teddysun/shadowsocks_install/master/shadowsocksR.sh chmod +x shadowsocksR.sh ./shadowsocksR.sh 2>&1 | tee shadowsocksR.log ``` Or Try the four in One Script Code: ```auto wget --no-check-certificate https://raw.githubusercontent.com/teddysun/shadowsocks_install/master/shadowsocks-all.sh chmod +x shadowsocks-all.sh ./shadowsocks-all.sh 2>&1 | tee shadowsocks-all.log ``` After the installation is complete, the script prompts as follows: Code: ```auto Congratulations, ShadowsocksR server install completed! Your Server IP :your_server_ip Your Server Port :your_server_port Your Password :your_password Your Protocol :your_protocol Your obfs :your_obfs Your Encryption Method:your_encryption_method Welcome to visit:https://shadowsocks.be/9.html Enjoy it! ``` **Uninstall method:** Log in as root and run the following command: Code: ```auto ./shadowsocksR.sh uninstall ``` After the installation is complete, ShadowsocksR is started in the background and runs: Code: ```auto /etc/init.d/shadowsocks status ``` You can see if the ShadowsocksR process has started. After the script is installed, ShadowsocksR has been automatically added to boot and self-start. **Use the command:** Code: ```auto Start: /etc/init.d/shadowsocks start Stop: /etc/init.d/shadowsocks stop Restart: /etc/init.d/shadowsocks restart Status: /etc/init.d/shadowsocks status Configuration file path: /etc/shadowsocks.json log file path: /var/log/shadowsocks.log code installation directory: /usr/local/shadowsocks ``` **Multi-user configuration example:** Code: ```auto { "server":"0.0.0.0", "server_ipv6": "[::]", "local_address":"127.0.0.1", "local_port":1080, "port_password":{ "8989":"password1", "8990":"password2", "8991":"password3" }, "timeout":300, "method":"aes-256-cfb", "protocol": "origin", "protocol_param": "", "obfs": "plain", "obfs_param": "", "redirect": "", "dns_ipv6": false, "fast_open": false, "workers": 1 } ``` In case you want to modify the configuration file, get these: ``` https://github.com/shadowsocksr-backup/shadowsocks-rss/wiki/Server-Setup https://github.com/shadowsocksr-backup/shadowsocks-rss/blob/master /ssr.md https://github.com/shadowsocksr-backup/shadowsocks-rss/wiki/config.json ``` ## ENJOY & HAVE A NICE DAY! _Source: Unknown_ ---
**Author:** ![seandex](https://onehack.st/letter_avatar_proxy/v4/letter/s/9de053/32.png) [@seandex](https://onehack.st/u/seandex)\ **Post date:** [January 20, 2020, 12:42pm UTC](https://onehack.st/t/openvpn-server-with-udp-tcp-squid-proxy-shadowsocksr/54377/2 "2020-01-20T12:42:11Z")
I doubt this script works at all. ---
**Author:** ![rawn7702](https://onehack.st/user_avatar/onehack.st/rawn7702/32/104678_2.png) [@rawn7702](https://onehack.st/u/rawn7702)\ **Post date:** [January 20, 2020, 1:19pm UTC](https://onehack.st/t/openvpn-server-with-udp-tcp-squid-proxy-shadowsocksr/54377/3 "2020-01-20T13:19:22Z")
Why so? Any specific reason?